STIHL® · 71 PM3
PICCO™ Micro™ 3 — 1/4 P · .043 in
STIHL 71 PM3 chain with 1/4 P pitch and .043 in gauge: semi-chisel cutter with a reduced-kickback design. Choose the exact drive-link count. Verified factory configurations include 10 in, 12 in, 14 in bars on models such as HT 56 C-E, HTA 50, HTA 50 Set, HTA 66, HTA 66 Set, HTA 86.
Confirm MSRP
Pitch: 1/4 P · Gauge: .043 in · Drive links: 28
Questions about fitment or chain style? Call the shop or Text the shop. We’ll help you choose the right chain!
All three numbers matter
PITCH. GAUGE. DRIVE LINKS.
Bar length helps you search, but it does not identify the chain by itself. Verify all three numbers before purchasing.
Always match pitch, gauge and drive-link count to the old chain, guide bar or owner’s manual.
Before you use this chain
WARNING: Kickback and improper chainsaw use can cause serious or fatal injury. Before use, read, understand and follow the operating and safety instructions in your saw’s manual. These notices do not replace that manual.
Low-kickback chain
STIHL recommends green-labeled, low-kickback chain and reduced-kickback guide bars for all users. Low kickback does not mean no kickback.
Use only a saw, guide bar and chain combination specified by the equipment manufacturer. Confirm the chain pitch also matches the drive sprocket; bar length alone does not establish compatibility.