STIHL · Packaged loops
Search by chainsaw model or bar length. Every result stays tied to the exact pitch, gauge and drive-link count.
132 verified packaged loops
Start with the saw model or bar length, then confirm pitch, gauge and drive links.
29 matching chain families
OILOMATIC STIHL RAPID Micro is a low-vibration saw chain. The lower vibration levels help reduce operator fatigue.
Model search: MS 261, MS 261 C-M, MSA 300 C-O, MS 250, MS 251, MS 251 C-BE…
Select your loop & add to cartRAPID Micro 3 is the reduced-kickback version of RAPID Micro. RM3 retains the performance features of the RM saw chain.
Model search: MS 261, MS 261 C-M, MSA 300 C-O, MS 250, MS 251, MS 251 C-BE…
Select your loop & add to cartRAPID Super uses an aggressive full-chisel cutter design. Its cutter and tie-strap design significantly reduces vibration while retaining cutting performance.
Model search: MS 250, MS 251, MS 251 C-BE, MS 261, MS 261 C-M, MS 271…
Select your loop & add to cartRAPID Super 3 combines aggressive full-chisel cutting with reduced vibration and a lower kickback tendency. A single-humped drive link helps reduce kickback, while the cutter and tie-strap design reduces vibration. It also offers excellent cutting and plunge-cutting efficiency.
Model search: MS 261, MS 261 C-M, MSA 300 C-O, MS 250, MS 251, MS 251 C-BE…
Select your loop & add to cartOILOMATIC STIHL RAPID Micro is a low-vibration saw chain. The lower vibration levels help reduce operator fatigue.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartRAPID Micro 3 is the reduced-kickback version of RAPID Micro. RM3 retains the performance features of the RM saw chain.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartRAPID Super uses an aggressive full-chisel cutter design. Its cutter and tie-strap design significantly reduces vibration while retaining cutting performance.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartOILOMATIC STIHL RAPID Micro is a low-vibration saw chain. The lower vibration levels help reduce operator fatigue.
PICCO Micro 3 cuts faster and smoother, with a lower kickback tendency than the earlier 3/8-inch PM1 chain.
Model search: HT 56 C-E, HTA 50, HTA 50 Set, HTA 66, HTA 66 Set, HTA 86…
Select your loop & add to cartRAPID Duro 3 is a carbide-tipped, low-vibration chain with a reduced-kickback tendency. STIHL reports that it stays sharp up to four times longer than standard chains.
Model search: MS 311, MS 362, MS 362 C-M, MS 362 RC-M, MS 391, MS 400 C-M…
Select your loop & add to cartRAPID HEXA uses a patented, high-performance full-chisel cutter. Compared with RAPID Super (RS), STIHL reports cuts up to 10% faster, longer-lasting sharpness and easier, faster hand filing. Requires a six-sided HEXA file or a HEXA-shaped grinding wheel for the STIHL USG.
Model search: MS 311, MS 362, MS 362 C-M, MS 362 RC-M, MS 391, MS 400 C-M…
Select your loop & add to cartOILOMATIC STIHL RAPID Micro is a low-vibration saw chain. The lower vibration levels help reduce operator fatigue.
Model search: MS 311, MS 362, MS 362 C-M, MS 362 RC-M, MS 391, MS 400 C-M…
Select your loop & add to cartRAPID Micro 3 is the reduced-kickback version of RAPID Micro. RM3 retains the performance features of the RM saw chain.
Model search: MS 311, MS 362, MS 362 C-M, MS 362 RC-M, MS 391, MS 400 C-M…
Select your loop & add to cartRAPID Super uses an aggressive full-chisel cutter design. Its cutter and tie-strap design significantly reduces vibration while retaining cutting performance.
Model search: MS 311, MS 362, MS 362 C-M, MS 362 RC-M, MS 391, MS 400 C-M…
Select your loop & add to cartRAPID Super 3 combines aggressive full-chisel cutting with reduced vibration and a lower kickback tendency. A single-humped drive link helps reduce kickback, while the cutter and tie-strap design reduces vibration. It also offers excellent cutting and plunge-cutting efficiency.
Model search: MS 311, MS 362, MS 362 C-M, MS 362 RC-M, MS 391, MS 400 C-M…
Select your loop & add to cartOILOMATIC STIHL RAPID Micro is a low-vibration saw chain. The lower vibration levels help reduce operator fatigue.
RAPID Duro 3 is a carbide-tipped, low-vibration chain with a reduced-kickback tendency. STIHL reports that it stays sharp up to four times longer than standard chains.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartOILOMATIC STIHL RAPID Micro is a low-vibration saw chain. The lower vibration levels help reduce operator fatigue.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartRAPID Micro 3 is the reduced-kickback version of RAPID Micro. RM3 retains the performance features of the RM saw chain.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartRAPID Micro Ripping is intended primarily for professional use with small sawmills. This semi-chisel chain offers low vibration, high performance, a smoother surface after cutting and a 10-degree filing angle.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartRAPID Super uses an aggressive full-chisel cutter design. Its cutter and tie-strap design significantly reduces vibration while retaining cutting performance.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartRAPID Super 3 combines aggressive full-chisel cutting with reduced vibration and a lower kickback tendency. A single-humped drive link helps reduce kickback, while the cutter and tie-strap design reduces vibration. It also offers excellent cutting and plunge-cutting efficiency.
.063-gauge bar setupsIncludes matching older setups. Confirm the installed bar and selected drive-link count.
Select your loop & add to cartA low-vibration chain designed for corded electric, battery-powered and gasoline-powered chainsaws or pole pruners with less than 1.5 kW (2.0 bhp) of power output.
Model search: HTA 135, HTA 135 Set, HTA 150, HTA 150 Set, HTA 160, HTA 160 Set…
Select your loop & add to cartPICCO Super 3 is a low-kickback, low-vibration chain with improved cutting and boring efficiency and less feed force. STIHL reports a 15% longer cutting life compared with PM3.
Model search: MSA 200 C-B, MSA 200 C-B Set, HT 134, HT 135, HT 250, MSA 220 C-B…
Select your loop & add to cartPICCO Duro 3 is designed for longer cutting-edge life and less frequent sharpening. Especially suited for dirty wood, treated wood, roots and hardwoods. It must be resharpened with a formed diamond grinding wheel.
Model search: MS 194 C-E, MS 201 C-EM, MS 194 T, MS 201 T C-M, MSA 220 TC-O, MSA 220 TC-O Set…
Select your loop & add to cartPICCO Micro retains its cutting performance with lower vibration levels to help reduce operator fatigue.
Model search: MS 194 C-E, MS 201 C-EM, MS 194 T, MS 201 T C-M, MSA 220 TC-O, MSA 220 TC-O Set…
Select your loop & add to cartPICCO Micro 3 cuts faster and smoother, with a lower kickback tendency than the earlier 3/8-inch PM1 chain.
Model search: MS 194 C-E, MS 201 C-EM, MS 194 T, MS 201 T C-M, MSA 220 TC-O, MSA 220 TC-O Set…
Select your loop & add to cartPICCO Super offers improved cutting and boring efficiency, plus reduced vibration compared with PICCO Micro saw chain.
Model search: MS 194 C-E, MS 201 C-EM, MS 194 T, MS 201 T C-M, MSA 220 TC-O, MSA 220 TC-O Set…
Select your loop & add to cartPICCO Super 3 is a low-kickback, low-vibration chain with improved cutting and boring efficiency and less feed force. STIHL reports a 15% longer cutting life compared with PM3.
Model search: MS 194 C-E, MS 201 C-EM, MS 194 T, MS 201 T C-M, MSA 220 TC-O, MSA 220 TC-O Set…
Select your loop & add to cartWARNING: Kickback and improper chainsaw use can cause serious or fatal injury. Before use, read, understand and follow the operating and safety instructions in your saw’s manual. These notices do not replace that manual.
STIHL recommends green-labeled, low-kickback chain and reduced-kickback guide bars for all users. Low kickback does not mean no kickback.
This yellow-labeled chain has an increased risk of kickback injury. It is intended only for people with extraordinary cutting needs, experience and specialized training for dealing with kickback.
Confirm pitch, gauge and drive-link count with your guide bar and equipment manual. Chain, bar and drive sprocket must be compatible. Ask us about safe operation, the correct cutting attachment and your saw’s chain-brake features.
The 2026 STIHL Guide references ANSI/OPEI B175.1 for gasoline chainsaws and UL 62841-4-1 for electric chainsaws. These standards concern tested equipment combinations—not a blanket certification of every chain on every saw. A low-kickback label does not prove that an unlisted saw/bar/chain combination meets the standard or eliminate the risk of injury. Follow the manufacturer’s approved combinations and instructions.
STIHL instruction manuals · STIHL safety manuals
STIHL products sold through U.S. STIHL dealers are for distribution in the United States only.
Don’t know all three numbers? Use the saw model and bar length as a starting point, then confirm the guide-bar markings or bring the old chain to Garland Saw.