Honda GS190
Honda GS190
Horizontal-shaft OHC power with a cast-iron cylinder liner and dual-element filtration for pumps, cultivators and pressure washers.
- Displacement
- 11.4 cu in (187 cm3)
- Net Power Output
- 5.2 HP (3.9 kW) @ 3,600 rpm
GS190 · Specifications
Base-model specifications. A model selection does not confirm an exact ordering type, shaft dimensions or replacement fit.
- Engine Type
- Air-cooled 4-stroke OHC
- Bore x Stroke
- 2.7 x 2.0 in (69 x 50 mm)
- Displacement
- 11.4 cu in (187 cm3)
- Net Power Output
- 5.2 HP (3.9 kW) @ 3,600 rpm
- Net Torque
- 8.3 lb-ft (11.3 Nm) @ 2,500 rpm
- PTO Shaft Rotation
- Counterclockwise (from PTO shaft side)
- Compression Ratio
- 8.5:1
- Carburetor
- Horizontal type butterfly valve
- Ignition System
- Transistorized magneto
- Starting System
- Recoil
- Lubrication System
- Splash
- Governor System
- Centrifugal Mechanical
- Air Cleaner
- Dual element
- Oil Capacity
- 0.61 US qt (0.58l)
- Fuel Tank Capacity
- 1.9 U.S. qts (1.8 liter)
- Fuel
- Unleaded 86 octane or higher
- Dry Weight
- 30.4 lb (13.8 kg)
Dimensions
- Length (min)
- 13.6" (345mm)
- Width (min)
- 14.5" (369mm)
- Height (min)
- 13.5" (343mm)
Overall dimensions are not crankshaft dimensions. Check the complete type and installation requirements.
Features
- Cast-iron cylinder liner
- Two-stage air filtration
- Crankshaft supported by ball bearings
- Three-piece oil-control ring
- Belt-driven overhead cam
- Automatic starting decompression
Applications
- Pressure washers
- Tillers / cultivators
- Agricultural equipment
- Water pumps
Configuration choices
Control arrangements vary by application. Confirm the complete engine type and installation details with the shop.