Honda GSV190
Honda GSV190
Vertical-shaft OHC power with a cast-iron cylinder liner for lawn, agricultural and other equipment.
- Displacement
- 11.4 cu in (187 cm3)
- Net Power Output
- 5.1 HP (3.8 kW) @ 3,600 rpm
GSV190 · Specifications
Base-model specifications. A model selection does not confirm an exact ordering type, shaft dimensions or replacement fit.
- Engine Type
- Air-cooled 4-stroke OHC
- Bore x Stroke
- 2.7 x 2.0 in (69 x 50 mm)
- Displacement
- 11.4 cu in (187 cm3)
- Net Power Output
- 5.1 HP (3.8 kW) @ 3,600 rpm
- Net Torque
- 8.3 lb-ft (11.3 Nm) @ 2,500 rpm
- PTO Shaft Rotation
- Counterclockwise (from PTO shaft side)
- Compression Ratio
- 8.5:1
- Carburetor
- Horizontal type butterfly valve
- Ignition System
- Transistorized magneto
- Starting System
- Recoil
- Lubrication System
- Splash
- Governor System
- Centrifugal Mechanical
- Air Cleaner
- Dual element
- Oil Capacity
- 0.58 US qt (0.55l)
- Fuel Tank Capacity
- 0.98 U.S. qts (0.93 liter)
- Fuel
- Unleaded 86 octane or higher
- Dry Weight
- 28.7 lb (13.0 kg)
Dimensions
- Length (min)
- 14.6" (371mm)
- Width (min)
- 13.5" (343mm)
- Height (min)
- 13.8" (349mm)
Overall dimensions are not crankshaft dimensions. Check the complete type and installation requirements.
Features
- Cast-iron cylinder liner
- Two-stage air filtration
- Crankshaft supported by ball bearings
- Three-piece oil-control ring
- Belt-driven overhead cam
- Automatic starting decompression
Applications
- Pressure washers
- Lawn mowers
- Commercial lawn and garden
- Forestry equipment
- Agricultural equipment
Configuration choices
Honda lists automatic choke as an available option. Confirm the engine type rather than assuming it is included.